BEADS & JEWELRY MAKING SUPPLIES REQUIRED

01    Bead Gallery® brown & white dyed agate stone round 12mm
          beads (20691)
02    Bead Gallery® brown & green dyed crackle agate stone tube
          12x16mm beads (20695)
01    Bead Gallery® brown & green dyed crackle agate stone rondells
          10x15mm beads (20699) (stripe)
03    Bead Gallery® brown & green dyed crackle agate stone rondells
          10x15mm beads (20697) (circle)
01    Bead Gallery® Brown dyed Yin-Yang on green agate stone disk
          12x28mm beads (20703)
01    Bead Gallery® brown & white dyed agate stone tube 15x22mm
          beads (20693)
01    Bead Gallery® brown & green dyed hexagon design crackle agate
          stone tube 11x30mm beads (20698)
01    Bead Gallery® aqua mix 6mm round Czech glass beads (14456)
01    antique brass tone plated head pin
01    antique brass tone eye pin
01    antique brass tone 15mm jump ring
01    antique brass tone lobster clasp small
57”  brown 3-ply waxed linen cording

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)
G-S Hypo Cement (JA –GSHYPO)

Time: 45 minutes

Level Of Difficulty: Intermediate
 

Easy To Follow DIY Instructions

1. Cut 3 lengths of 19” cording.
2. String lobster clasp, and form 2 simple knots around clasp. Pull tight. Trim short end of cording, dab knot with glue, and let dry.
3. Separate cords, string on center cord brown/green tube 12x16mm, bring cords together, and form an overhand knot.
4. Bring cords together, string hexagon tube, form an overhand knot, brown/green rondelle (stripe), overhand knot, Yin-Yang, and overhand knot.
5. Separate cords, string on center cord brown/green tube 12x16mm, bring cords together, and form an overhand knot.
6. Bring cords together, brown/green rondelle (circle), form an overhand knot, brown white tube, overhand knot, brown/green rondelle (circle), overhand knot, brown/white round 12mm, and overhand knot.
7. String 15mm jump ring, form 2 simple knots around ring. Pull tight. Trim cording, and dab knot with glue.
8. Using eye pin, string brown/green rondelle (circle) and form a simple loop.
9. Using head pin, string green Czech glass and form a wrapped loop. Connect to loop from step 8.
10. Open end of dangle and attach to 15mm jump ring.

Techniques Used In This Project:
1. How to form an overhand knot.
2. How to form a simple knot.
3. How to open/close a jump ring.