urban earth Necklaces 

DIY JEWELRY making 


Designed by Denise Yezbak Moore
for Halcraft Collection

Materials:
Purple Druzy Necklace
01     Bead Gallery® amethyst druzy rhinestone pendant (13598)
72     Bead Gallery® purple matte fire crackle agate 6mm round (13327)
20     Bead Gallery® purple matte fire crackle agate 8mm round (13336)
08     Bead Gallery® silver plate rondelle (12150)
02     silver tone 4mm jump ring
01     silver tone 8mm jump ring
01     silver tone spring clasp
33”   brown 3-ply waxed linen cording

Amber Crystal Necklace
01     Bead Gallery® quartz crystal rhinestone pendant (13790)
62     Bead Gallery® honey agate amber round 6mm (13320)
40     Bead Gallery® honey agate amber round 4mm (13322)
06     Bead Gallery® silver plate rondelle (12150)
02     Bead Gallery® silver plated smooth round (12182)
03     Bead Gallery® silver plated dot bead mix (12419)
03     Bead Gallery® silver plated round 3mm (12153)
02     silver tone 4mm jump ring
01     silver tone 8mm jump ring
01     silver tone spring clasp
41”   brown 3-ply waxed linen cording

Aqua Crystal Necklace
30    aqua dyed dolomite round 6mm (13227)
26    aqua dyed dolomite round 8mm (13226)
04    aqua coated quartz stone nugget (14971)
03    silver tone 2” eye pin
01    silver tone 2” head pin
02     silver tone 4mm jump ring
01     silver tone 8mm jump ring
01     silver tone spring clasp
60”   brown 3-ply waxed linen cording

Tools:
Wire nippers
Super glue
2 chain nose pliers

Level of difficulty (Beginner to Intermediate)

Time – Less than 1 hour each necklace

Instructions:
Purple Druzy Necklace
1.     Cut a 33” length of cording.
2.     Fold cord in half, string loop of pendant, pass cords through loop of cord and pull tight (form a lark’s head knot).
3.    Left side – String 8mm agate, (rondelle, 3 agate 8mm) repeat 2 times, rondelle and 36 agate 6mm.
4.    Attach 4mm jump ring to 8mm jump ring.
5.    String 4mm jump ring and form 2 simple knots around 4mm jump ring.
6.    Trim end and dab knot with super glue.
7.    Right side – Repeat step 3 on right side of necklace.
8.    Attach 4mm jump ring to spring clasp.
9.    String 4mm jump ring and form 2 simple knots around 4mm jump ring.
10.    Trim end of cording and dab knot with super glue.

Amber Crystal Necklace
1.    Cut 33” length and 8” length of cording.
2.    Using 33” of cording, fold cord in half, string loop of pendant, pass cords through loop of cord and pull tight (form a lark’s head knot).
3.    Left side – String 3mm round, 4 agate 6mm, rondelle, 2 agate 6mm, rondelle, 4 agate 6mm, rondelle, 21 agate 6mm, and 20 agate 4mm.
4.    Attach 4mm jump ring to 8mm jump ring.
5.    String 4mm jump ring and form 2 simple knots around 4mm jump ring.
6.    Trim end of cording and dab knot with super glue.
7.    Repeat Step 3 on right side of necklace.
8.    Attach 4mm jump ring to spring clasp.
9.    String 4mm jump ring and form 2 simple knots around 4mm jump ring.
10.    Trim end of cording and dab knot with super glue.
11.    Using 8” of cording, string 3mm, dot bead, 3mm, dot bead, 3mm, and dot bead to center of cording.
12.    Wrap cord around base of pendant and form a simple knot.
13.    Bring cords around to the front and form a simple knot.
14.    Bring cords around the back, form 2 simple knots, trim ends and dab knot with super glue.

Aqua Crystal Necklace
1.    Using 2” eye pin, string crystal and form a simple loop.
2.    Repeat step 1 two times chaining loops together as you go.
3.    Using 2” head pin, string crystal and form a simple loop.
4.    Connect loop to crystal chain.
5.    Cut 60” length of cording.
6.    Fold cord in half, string loop of pendant, pass cords through loop of cord and pull tight (form a lark’s head knot).
7.    Form an overhand knot on each side of necklace.
8.    Left side – String (6mm dolomite, form overhand knot) repeat 14 times, (8mm dolomite, form overhand knot) repeat 12 times.
9.    Repeat step 8 on right side of necklace.
10.    Attach 4mm jump ring to 8mm jump ring.
11.    String 4mm jump ring and form 2 simple knots around 4mm jump ring.
12.    Trim end and dab knot with super glue.
13.    Attach 4mm jump ring to spring clasp.
14.    String 4mm jump ring and form 2 simple knots around 4mm jump ring.
15.    Trim end of cording and dab knot with super glue.


Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?