Spend $50+, get free shipping in the contiguous US.

Trés Chic DIY Bracelet


01      Bead Gallery® white acrylic pearl & rhinestone connector (13156)
01      Bead Gallery® silver-plated rhinestone hamsa connector (14765)
01      Bead Gallery® antique silver-plated peace charm (14239)
17      Bead Gallery® natural dumortierite polished 8mm round (blue) (17278)
07      Bead Gallery® natural dumortierite polished 4mm round (blue) (17276)
12      Bead Gallery@ natural dumortierite polished 10mm round (blue) (17279)
14      Bead Gallery® magenta dyed agate polished 8mm round (17275)
02      Bead Gallery® crystal & silver tone rhinestone ball 8mm (17338)
12      Bead Gallery® crystal & silver tone rhinestone ball 6mm (17337)
01      silver tone head pin
01      silver tone 4mm jump ring
150” Black 3-ply waxed linen cording

Wire nippers
Round nose pliers
2 – Chain nose pliers
Super glue
Small clipboard or macramé board
Large document clip

Level of difficulty (Advanced)

Time – 1 hour

Tip: Make sure your macramé loop matches the size of your pearl connector.

1. Cut 3 lengths of 50” cording.
2. Bring cords together; move down 7” and place cords under clipboard clip.
3. Separate strands and clip the center strand to bottom of clipboard with large document clip.
4. Form 18 square knots (remove from clipboard, fold macramé in half and make sure your pearl connector will slip through the loop.)
5. Form a loop with the macramé section and form a simple knot.
6. Pull knot tight, trim short ends ONLY.
7. Dab knot with super glue. Set aside and let dry.
8. Using head pin, string magenta 8mm and form a simple loop.
9. Attach dangle from step 8 to bottom loop of hamsa connector. Set aside.
10. Separate strands – Strand 1 – String blue 4mm, top loop of hamsa connector, blue 4mm, 4 blue 8mm, rhinestone ball, 8mm, 3 blue 8mm, rhinestone ball 6mm, magenta 8mm, rhinestone ball 6mm, 3 blue 8mm, rhinestone ball 8mm, 4 blue 8mm, and blue 4mm. Set aside.
11. Strand 2 – String blue 4mm, 6 magenta 8mm, 2 rhinestone ball 6mm, 3 blue 8mm, 2 rhinestone ball 6mm, 6 magenta 8mm, and blue 4mm. Set aside.
12. Strand 3 – String blue 4mm, rhinestone ball 6mm, (2 blue 10mm, rhinestone ball 6mm) repeat 4 times, 2 blue 10mm, and blue 4mm.
13. Using 4mm jump ring, attach peace charm to pearl connector.
14. Bring all 3 strands together, string other end of pearl connector and form 2 knots.
15. Trim strands and dab knot with super glue.

Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.


// force this stupid script to onlny run on the contact page