DESIGNED BY LARISMA Mandaro
FEATURING BEAD GALLERY® BEADS BY HALCRAFT COLLECTION
Beads & Jewelry Making Supplies Required:
Bead Gallery® Multi Glass Faceted Round 30mm Pendant (19295A)
Bead Gallery® Super Bundle- Aqua Mix Rondelle 3x4mm (19289A)
Bead Gallery® Super Bundle- Silver Plated Smooth Rondelle 4x6mm Beads (19225A)
Bead Gallery® Super Bundle-Silver Plated Smooth Toggles & Clasp 15mm (19243A)
Tigertail Wire Kit (20730)
EZ- Crimp Ends, Silver Color, 10 pcs (344B-010)
49 Strand Stainless Steel Bead Stringing Wire (JW11T-O)
Tools:
Beadalon® Classic Nipper Tool (JTNIP 1)
Beadalon® Slim Line Round Nose Pliers (201A-014)
Beadalon® Slim Line Chain Nose Pliers (201A- 011)
Beadalon® Mighty Crimp Tool (JTCRIMP3)
Level of difficulty: Beginner
Time: 45 Minutes
Easy to Follow DIY Instructions:
First strand with pendant necklace:
1. Cut 28” of beading wire
2. Insert end if cording into crimp bead.
3. Using crimping tool on first hole, then crimp.
4. String 3 pieces 4mm rondelle aqua mix faceted beads.
5. String 1-piece 4mm smooth metal rondelle bead.
6. String 10 pieces 4mm rondelle aqua mix faceted beads.
7. String 1-piece 4mm smooth metal rondelle bead.
8. Repeat 6 times.
9. String 3-pieces 4mm smooth metal rondelle beads follow by the pendant as a center.
10. Repeat the pattern clockwise.
11. Pass end cording through crimp.
12. Using round nose pliers, grab end of the cording and pull through the crimp.
13. Slide the crimp to the end of necklace.
14. Using crimping tool on first hole, crimp.
15. Trim end wire.
16. Using 6mm jump ring, attach toggle to right side of necklace.
Second Middle Strand Necklace:
1. Cut 26” of beading wire
2. Insert end if cording into crimp bead.
3. Using crimping tool on first hole, then crimp.
4. String 27 pieces 4mm rondelle aqua mix faceted beads.
5. String 3 pieces 4mm silver plated smooth rondelle beads.
6. String 40 pieces 4mm rondelle aqua mix faceted beads.
7. String 3 pieces 4mm silver plated smooth rondelle beads.
8. Repeat the pattern clockwise.
9. Pass end cording through crimp.
10. Using round nose pliers, grab end of the cording and pull through the crimp.
11. Slide the crimp to the end of necklace.
12. Using crimping tool on first hole, crimp.
13. Trim end wire
14. Using 6mm jump ring, attach toggle to right side of necklace.
Third Last Top Strand:
1. Cut 24” of beading wire.
2. Insert end if cording into crimp bead.
3. Using crimping tool on first hole, then crimp.
4. String 137 pieces 4mm rondelle aqua mix faceted beads.
5. Pass end cording through crimp.
6. Using round nose pliers, grab end of the cording and pull through the crimp.
7. Slide the crimp to the end of necklace.
8. Using crimping tool on first hole, crimp.
9. Trim end wire
10. Using 6mm jump ring, attach toggle to right side of necklace.
Last Step to Put all Three Strands Together:
1. Attach 8mm jump ring on each side of toggles.
2. Attach 6mm jump ring of each strand to 8mm jump ring for both ends.
3. Put the toggle together to close.
Larisma Mandaro has been a part of the Halcraft family for 23 years! She has worked in all departments of the Halcraft USA throughout the years.
Becoming our in-house jewelry designer was the most organic transition because of her love, and knowledge of our products.
We are excited to share her creativity with the world and let her take you on a journey of creative bliss!