BEADS & JEWELRY MAKING SUPPLIES REQUIRED

02   Bead Gallery® Super bundle – real flowers in acrylic teardrop
         5x26mm pendants (2Packs/2Pieces) (10161A)
10   Bead Gallery® Super bundle – light blue glass faceted briolettes
         6x9mm beads (3Packs/36Pieces) (10117A) (teardrop)
20   Bead Gallery® Super bundle – red glass rondell 3x6mm beads
         (3Packs/168Pieces) (10191A)
26” German style wire, round silver plated, 24g (180B-024)
08   silver tone 4mm jump ring
02   silver tone ear wires

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: 45 minutes to 1 hour

Level Of Difficulty: Advanced

Easy To Follow DIY Instructions

1. Centerpiece - Remove bale from pendant.
2. Cut 5” of wire, string pendant to center and bend wire upward.
3. Using your round nose pliers, make a slight bend at the top of pendant on each side of wire.
4. Bring wires together and string red rondelle.
5. Wrap wire around 1 time and trim end.
6. String red rondelle and form a wrapped loop.
7. Sides - Cut 4” of wire, form a wrapped loop.
8. String 2 blue teardrops, red rondelle, dangle, red rondelle, 2 blue teardrops and form a wrapped loop.
9. Cut 2 ½” of wire, form a partial wrapped loop, connect loop to left side of centerpiece, and complete wrapped loop.
10. String 2 red rondelles and complete a wrapped loop.
11. Repeat steps 7-10 on right side of centerpiece.
12. Top Center – Cut 2 ½” of wire and form a wrapped loop.
13. String blue teardrop and form a wrapped loop.
14. Bend wires upward with loops facing to the sides.
15. Connection of earrings - Connect 2 – 4mm jump rings.
16. Open 1 jump ring, connect left side loop to left side teardrop loop.
17. Repeat 15-16 on right side.
18. Using 4mm jump ring, connect ear wire to top 2 – 4mm jump rings.
19. Repeat steps 1-18 for 2nd earring.

Techniques Used In This Project:
1. How to form a wrapped loop.
2. How to open/close jump ring.