RED Bracelets

DESIGNED BY DENISE YEZBAK MOORE
FEATURING BEAD GALLERY® BEADS BY HALCRAFT COLLECTION 

 
Materials:
23   Bead Gallery® Czech fire polished 8mm red opal (15987)
03   Bead Gallery® silver-plated star charm (12237)
19   Bead Gallery® dyed howlite round red 10mm (10169)
01   Bead Gallery® crystal rhinestone star flower pendant (13744)
33   Bead Gallery® red coral faceted round 6mm (10746)
01   Bead Gallery® light red tassel (13778)
20   Bead Gallery® red dyed bamboo coral lantern (10741)
7”    Bead Gallery® red coral chips (10730)
19   Bead Gallery® Red Czech fire polished 10mm (13527)
01   Bead Gallery® ruby red cubic zirconia pendant (15097)
19   Bead Gallery® light red Czech 8mm round (13501)
01   Bead Gallery® red glass connector (13724)
74” Stretch .5mm beading cord

Tools:
Beadalon® wire nippers
2 – Chain nose pliers
Super glue
Bead Bugs®

Level of difficulty (Beginner)

Time – Less than 20 minutes per bracelet

Tip: Stretch cord before stringing your beads. This will help maintain the shape of your bracelet. Be sure to measure your wrist to insure a proper fit. A great alternative to the overhand knot is the surgeon’s knot. Be sure to measure your wrist and add or subtract beads as needed.

Red Opal Star Bracelet
Instructions:
1. Cut 10” of stretch cord.
2. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
3. Attach Bead Bug to end of 10” of stretch cord.
4. String 23 red opal beads.
5. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
6. Hide knot inside of closest bead.
7. Using jump ring, attach star charm to bracelet.

Red Rhinestone Star Flower Bracelet
Instructions:
8. Cut 10” of stretch cord.
9. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
10. Attach Bead Bug to end of 10” of stretch cord.
11. String 19 red howlite 10mm beads.
12. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
13. Hide knot inside of closest bead.
14. Using jump ring, attach rhinestone star flower pendant.

Red Coral Tassel Bracelet
Instructions:
15. Cut 10” of stretch cord.
16. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
17. Attach Bead Bug to end of 10” of stretch cord.
18. String 33 red coral 6mm beads.
19. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
20. Hide knot inside of closest bead.
21. Using scissors, cut tassel to desired length.
22. Open jump ring on top of tassel and connect to bracelet.

Lantern Star Bracelet
Instructions:
23. Cut 10” of stretch cord.
24. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
25. Attach Bead Bug to end of 10” of stretch cord.
26. String 20 coral lantern beads.
27. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
28. Hide knot inside of closest bead.
29. Using jump ring, attach star charm.

Red Coral Chip Star Bracelet
Instructions:
30. Cut 10” of stretch cord.
31. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
32. Attach Bead Bug to end of 10” of stretch cord.
33. String 7” of red coral chips beads.
34. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
35. Hide knot inside of closest bead.
36. Using jump ring, attach star charm.

Red Czech CZ Pendant Bracelet
Instructions:
37. Cut 10” of stretch cord.
38. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
39. Attach Bead Bug to end of 10” of stretch cord.
40. String 19 red 10mm Czech glass beads.
41. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
42. Hide knot inside of closest bead.
43. Remove bale from pendant.
44. Using jump ring, attach cubic zirconia pendant.

Red Czech Glass Connector Bracelet
Instructions:
45. Cut 14” of stretch cord.
46. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
47. Attach Bead Bug to end of 10” of stretch cord.
48. String 19 red 8mm Czech glass beads.
49. String left side of connector, pass cord back through 10 beads and attach Bead Bug.
50. Removed Bead Bug from other side of strand.
51. String right side of connector, pass cord back through 9 beads.
52. Remove Bead Bug, bring both ends together and form an
overhand knot. Pull tight. Make a second overhand knot
and put a drop of glue between knots. Pull tight.
53. Hide knot inside of closest bead.


Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?