BEADS & JEWELRY MAKING SUPPLIES REQUIRED

Lampwork Bracelet
09   Bead Gallery® red lampwork glass wire wrapped 13x20mm
         beads (15207A)
07   Bead Gallery® silver tone 4mm jump ring
01   Bead Gallery® silver tone 8mm jump ring
01   Bead Gallery® silver tone lobster clasp

Red 10mm Rhinestone Rondelle Bracelet
14   Bead Gallery® red glass Czech round fire polished faceted
         10mm (13527)
08   Bead Gallery® silver tone rondell with crystal rhinestones 5x7mm
         beads (18721)
10” Beadalon® Elasticity stretch cord (JEO.8T-0025M)

Red Starfish Bracelet
17   Bead Gallery® red glass Czech round fire polished faceted
         10mm (13527)
01   Bead Gallery® silver plated starfish with rhinestones 22mm
         pendant (18605)
01   Bead Gallery® silver tone 10mm jump ring
10” Beadalon® Elasticity stretch cord (JEO.8T-0025M)

Oval Rhinestone Red Bracelet
01   Bead Gallery® Red Czech glass fire polished faceted round
         7mm (15341)
17   Bead Gallery® ruby red assortment (oval beads) (16757)
02   Bead Gallery® silver tone rondell with pave crystal rhinestones
         6x9mm beads (18726)
10” Beadalon® Elasticity stretch cord (JEO.8T-0025M)

Red Connector Bracelet
01   Bead Gallery® red glass and silver edge rectangle 9x31mm
         connector (13724)
20   Bead Gallery® Red Czech glass fire polished faceted round
         7mm (15341)
02   Bead Gallery® red small tassel 13x20mm (14674)
02   Bead Gallery® silver tone 4mm jump ring
20” Beadalon® Elasticity stretch cord (JEO.8T-0025M)

Tools:
Beadalon® Classic nipper tool (JTNIP1)
G-S Hypo Cement (JA-GSHYPO)
Bead Bugs®

Level of difficulty (Beginner)

Time – Less than 10 minutes per bracelet

Tips: Stretch cord before stringing your beads. This will help maintain the shape of your bracelet.

Be sure to measure your wrist to insure a proper fit. Add and subtract beads as needed.

A great alternative to the overhand knot is the surgeon’s knot.

Easy To Follow DIY Instructions

Lampwork Bracelet
1. Using 4mm jump rings, chain together 8 lampwork beads.
2. Using 4mm jump ring, attach lobster clasp to end of chain.
3. Using 8mm jump ring, attach lampwork bead to other end of chain.

Red 10mm Rhinestone Rondelle Bracelet
4. Cut 10” of stretch cord.
5. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
6. Attach Bead Bug to end of 10” of stretch cord.
7. String 6 Czech 10mm, (rhinestone rondelle, Czech 10mm) repeat 7 times.
8. Remove Bead Bug, bring both ends together, form an
overhand knot, and Pull tight. Form a second overhand knot; pull tight and dab knot with glue. Let Dry.
9. Hide knot inside of closest bead.

Red Starfish Bracelet
10. Cut 10” of stretch cord.
11. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
12. Attach Bead Bug to end of 10” of stretch cord.
13. String 17 Red 10mm Czech glass beads.
14. Remove Bead Bug, bring both ends together, form an
overhand knot, and Pull tight. Form a second overhand knot; pull tight and dab knot with glue. Let Dry.
15. Hide knot inside of closest bead.
16. Remove bail from pendant.
17. Using a 8mm jump ring, attach starfish to bracelet.

Oval Rhinestone Red Bracelet
18. Cut 10” of stretch cord.
19. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
20. Attach Bead Bug to end of 10” of stretch cord.
21. String 12 Czech 7mm, 2 oval red, pave rondelle, oval red, pave rondelle, and 2 oval red.
22. Remove Bead Bug, bring both ends together, form an
overhand knot, and Pull tight. Form a second overhand knot; pull tight and dab knot with glue. Let Dry.
23. Hide knot inside of closest bead.

Red Connector Tassel Bracelet
24. Cut 20” of stretch cord.
25. Stretch cord well before stringing your beads. This will help
maintain the bracelets shape in the future.
26. Attach Bead Bug to end of 20” of stretch cord.
27. String 20 red Czech 7mm glass beads.
28. String connector on end of stretch cord and pass cording back through 10 beads. Connect bead bug to end of cording.
29. Remove bead bug from other side of cording.
30. String other side of connector and pass cording back through 10 beads.
31. Remove Bead Bug, bring both ends together, form an
overhand knot, and Pull tight. Form a second overhand knot; pull tight and dab knot with glue. Let Dry.
32. Hide knot inside of closest bead.
33. Using 4mm jump rings, connector tassels to each loop of connector.