Designed by Denise Yezbak Moore
featuring Bead Gallery® beads
available exclusively at www.Halcraftcollection.com
    
Materials:   
02    Bead Gallery® honey agate round amber dyed 6mm (13320)
02    Bead Gallery® orange dyed imperial jasper round 8mm (13300)
02    Bead Gallery® pink dyed imperial jasper round 8mm (13301)
02    Bead Gallery® light purple dyed imperial jasper  8mm (13297)
02    Bead Gallery® dark purple dyed imperial jasper  8mm (13302)
02    Bead Gallery® blue dyed imperial jasper round 6mm (13294)
02    Bead Gallery® aqua dyed imperial jasper round 8mm (13299)
02    Bead Gallery® 10mm round green dyed agate (13345)
04    Bead Gallery® antique silver plated cylinder 5x9mm (12157)
02    loops of silver tone memory wire
44”  brown suede leather cording

Tools:
Chain-nose pliers (2)
Wire nippers
Round-nose pliers
Super glue

Level of difficulty (Advanced)

Time – ½ to 1 hour depending on skill level
                           
Instructions:
1.    Cut 2 lengths of 22” suede leather cording.  Set aside.
2.    Cut 1½ loops of memory wire.
3.    Form a simple loop (sideways) at end of memory wire.
4.    String honey agate, orange agate, pink agate, light purple agate,
        dark purple agate, blue agate, aqua agate, green agate, aqua agate,
        blue agate, dark purple agate, light purple agate, pink agate, orange
        agate and honey agate.
5.    Tighten beads and form a bend in the wire.
6.   Trim long end and form a simple loop (sideways) at end of memory
       wire.
7.    Using 1 length of leather cording, string left side loop.
8.    Form a small loop (approximately ½”) with leather and dab with
        super glue.
9.    Cut ¼” piece of leather and glue to leather loop (this will keep the
        bead from step 10 snug).
10.  String 2 tube beads over leather loop.
11.  Repeat steps 7-10 on other side of bracelet. This bracelet does not
         have a clasp.  Secure bracelet by wrapping around wrist and
         forming  a simple knot.