BEADS & JEWELRY MAKING SUPPLIES REQUIRED

01   Bead Gallery® rose pink cubic zirconia faceted 14x28mm pointy
         oval pendant (15104)
01   Bead Gallery® rose pink cubic zirconia faceted 20mm square
         pendant (15085)
01   Bead Gallery® rose pink cubic zirconia faceted 15x20mm rectangle
         pendant (15082)
31   Bead Gallery® pink dyed imperial jasper round beads 6mm (13296)
38   Bead Gallery® rose dyed dolomite 6mm round beads with tassel
        (10139)
13   Bead Gallery® imperial jasper dyed pink 15mm lentil beads (13335)
02   Beadalon® crimp tube variety pack, size #1 (using gold only)
         (305X-129)
28” Beadalon® 49 strand stainless steel bead stringing wire, .015in
         (0.38mm) (JW10T-0)
02   antique brass tone head pins
09   antique brass tone 6mm jump rings
04   antique brass tone 10mm jump rings
01   antique brass tone 8mm jump ring
01   antique brass lobster clasp small

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)
Beadalon standard crimp tool (JTCRIMP1)

Time: Less than 45 minutes

Level Of Difficulty: Beginner

Easy To Follow DIY Instructions

1. Remove bails from all 3 cubic zirconia pendants and attach a 10mm jump ring. Set aside.
2. Cut 28” of beading wire.
3. String crimp tube, form loop, pass wire back through crimp tube, and crimp.
4. String 18 rose dolomite 6mm, 5 pink imperial jasper 6mm, (pink imperial jasper lentil, pink imperial jasper 6mm) repeat 5 times, cubic zirconia oval, 4 pink imperial jasper 6mm, cubic zirconia rectangle, 4 pink imperial jasper 6mm, cubic zirconia square, (pink imperial jasper 6mm, pink imperial jasper lentil) repeat 5 times, 5 pink imperial jasper 6mm, 18 rose dolomite 6mm, and crimp tube.
5. Form loop, pass wire back through crimp tube, and crimp.
6. Connect 8mm jump ring to left side of necklace.
7. Using 6mm jump ring, connect lobster clasp to right side of necklace.
8. Connect 4 jump rings 6mm between pink dolomite and clasp on each side of necklace.
9. Attach a 10mm jump ring to tassel and connect to 8mm jump ring on left side of necklace.
10. Using head pin, string pink imperial jasper lentil, rose dolomite, and form a wrapped loop.
11. Attach dangle from step 10 to 8mm jump ring from step 6.
12. Using head pin, string rose dolomite, pink imperial jasper 6mm, and form a wrapped loop.
13. Attach dangle from step 12 to 8mm jump ring from step 6.
 

Techniques Used In This Project:
1. How to crimp wire.
2. How to form a wrapped loop.
3. How to open/close a jump ring.