Materials: (1 Package unless otherwise stated)

23 pcs Bead Gallery® Yellow dyed agate stone heishe rondelle 3x6.5mm beads (13272A)

14 pcs Bead Gallery® glass beads faceted bicone light amber AB finish (11757)

01 pcs Bead Gallery® natural stalactite druzy agate stone with gold 25-35mm connector (17721A)

01 pcs Bead Gallery® gold tone snake with rhinestones 15sx24mm pendant (13940)

03 pcs gold tone 4mm jump ring

 01 pcs gold tone 6mm jump ring

¾” Beadalon French wire, 0.80mm/.032 in, copper base, gold color (JFFW0.8G-01M)

02 pcs Beadalon® crimp tube variety pack size 2 (305X-129)

01 pcs lobster clasp gold tone

11” Beadalon® 49 strand stainless steel bead stringing wire, 0.46mm (JW11T-0)

 Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon 2 slim line chain nose pliers (201A-011)
Beadalon standard crimp tool (JTCRIMP1)

 Time: Less than 1 hour

 Level Of Difficulty: Beginner

Instructions

1. Cut 3/4” of French wire in half. Set aside.

2. Cut 11” of beading wire.

3. String crimp tube, 1 length of French wire, pass wire through one end of stone connector lining up the French wire, pass wire back through crimp tube and crimp.

4. String 4 heishi, (bicone, heishe) repeat 13 times, and 3 heishi beads.

5. String crimp tube, French wire, pass wire back through crimp tube and crimp.

6. Using 4mm jump ring, connect lobster clasp to right side of bracelet.

7. Using 4mm jump ring, connect 6mm jump ring to stone connector.

8. Remove bail from snake charm and using a 4mm jump ring, attach to 4mm jump ring next to 6mm jump ring.