BEADS & JEWELRY MAKING SUPPLIES REQUIRED

02     Bead Gallery® semi precious labradorite (AA Grade) stone disks
           oblong faceted 15x25mm beads (20033)
02     Bead Gallery® semi precious blue dyed agate stone silver lustered
           faceted round 8mm beads (20035)
02     Bead Gallery® antique silver plated super fine rope pattern beads
           rings 13mm (12117)
02     Bead Gallery® antique silver plated 4-hole spacer with diamond
           design beads 7x18mm (12138)
03”   Beadalon® chain, 2.3mm (.091 in) small cable, silver plate
           (340B-001)
02     gold tone 4mm jump rings
02     silver tone ear wire
04     silver tone eye pin
02     silver tone head pin

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: 45 minutes

Level Of Difficulty: Beginner to Intermediate

Easy To Follow DIY Instructions

1. Using eye pin, string 1st hole of 4-hole spacer, blue 8mm and form a simple loop.
2. Repeat step 1 on 4th hole of 4-hole spacer.
3. Slightly bend bead end loops inward.
4. Open loops and attach rope ring.
5. Using head pin, string labradorite nugget, and form a simple loop.
6. Attach loop to bottom of rope ring.
7. Cut 1 ½” of chain.
8. Open loops at the top of earring and attach chain.
9. Attach ear wire to center of chain.
10. Repeat steps 1-9 for 2nd earring.