undefined

Liberty DIY Bracelet STack

DIY JEWELRY making 


Designed by Denise Yezbak Moore
featuring Bead Gallery® beads
available exclusively at www.Halcraftcollection.com

Instructions:
Materials:   
26       Bead Gallery® reconstituted lapis 6mm round (10679)
6 ¾”   Bead Gallery® lapis (B) tooth spikes (10684)
29       Bead Gallery® reconstituted lapis matte rondelle (14753)
19       Bead Gallery® white dolomite round 10mm (10838)
6 ¾”   Bead Gallery® white howlite chips (10960)
6 ¾”   Bead Gallery® rock quartz crystal teeth spikes (10942)
6 ¾”   Bead Gallery® red coral chips (10730)
28       Bead Gallery® red coral faceted rounds 6mm (10746)
19       Bead Gallery® dyed howlite round red 10mm (10169)
26       Bead Gallery® silver-plated small star charm (12237)
1         Bead Gallery® silver-plated star charm (13933)
90”     Stretch .5mm beading cord

Tools:
Beadalon® wire nippers
Super glue
Bead Bugs®

Level of difficulty (Beginner)

Time – Less than 10 minutes per bracelet

Tip: Stretch cord before stringing your beads.  This will help maintain the shape of your bracelet. Be sure to measure your wrist to insure a proper fit. A great alternative to the overhand knot is the surgeon’s knot. Be sure to measure your wrist and add or subtract beads as needed.

Red Faceted Coral Bracelet                               
Instructions:
1.    Cut 10” of stretch cord.
2.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
3.    Attach Bead Bug to end of 10” of stretch cord.
4.    String 28 red coral faceted beads.
5.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
6.    Hide knot inside of closest bead.

    Red Howlite Bracelet
Instructions:
7.    Cut 10” of stretch cord.
8.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
9.    Attach Bead Bug to end of 10” of stretch cord.
10.    String 19 red howlite 10mm.
11.    Remove Bead Bug, bring both ends together and form an
 overhand knot.  Pull tight.  Make a second overhand knot
 and put a drop of glue between knots.  Pull tight. 
12.    Hide knot inside of closest bead.

    Red Coral Chip Bracelet
Instructions:
13.    Cut 10” of stretch cord.
14.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
15.    Attach Bead Bug to end of 10” of stretch cord.
16.    String 6 ¾” of red coral chips.
17.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
18.    Hide knot inside of closest bead.

    Crystal Spike Bracelet
Instructions:
19.    Cut 10” of stretch cord.
20.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
21.    Attach Bead Bug to end of 10” of stretch cord.
22.    String 6 ¾” of crystal spikes.
23.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
24.    Hide knot inside of closest bead.

    White Quartz Bracelet
Instructions:
25.    Cut 10” of stretch cord.
26.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
27.    Attach Bead Bug to end of 10” of stretch cord.
28.    String 19 white quartz 10mm beads.
29.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
30.    Hide knot inside of closest bead.

    White Howlite Chip Bracelet
Instructions:
31.    Cut 10” of stretch cord.
32.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
33.    Attach Bead Bug to end of 10” of stretch cord.
34.    String 6 ¾” of white howlite chips.
35.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
36.    Hide knot inside of closest bead.

    Lapis Rondelle Star Charm Bracelet
Instructions:
37.    Cut 10” of stretch cord.
38.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
39.    Attach Bead Bug to end of 10” of stretch cord.
40.    String 1 lapis round, star charm, 1 lapis round and 28 lapis rondelles.
41.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
42.    Hide knot inside of closest bead.

    Lapis Multiple Star Charm Bracelet
Instructions:
43.    Cut 10” of stretch cord.
44.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
45.    Attach Bead Bug to end of 10” of stretch cord.
46.    String 1 lapis round, star charm repeat 25 times.
47.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
48.    Hide knot inside of closest bead.

    Lapis Spike Bracelet
Instructions:
49.    Cut 10” of stretch cord.
50.    Stretch cord well before stringing your beads.  This will help
maintain the bracelets shape in the future.
51.    Attach Bead Bug to end of 10” of stretch cord.
52.    String 6 ¾” of lapis spikes.
53.    Remove Bead Bug, bring both ends together and form an
overhand knot.  Pull tight.  Make a second overhand knot
and put a drop of glue between knots.  Pull tight. 
54.    Hide knot inside of closest bead.

Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?