Materials: (1 Package unless otherwise stated)

34 pcs Bead Gallery® Lapis stone round 4mm beads (21440)

04 pcs Bead Gallery® Lapis stone round 6mm beads (21439)

08 pcs Bead Gallery® Lapis stone round 8mm beads (21438)

04 pcs silver tone plated eye pin (12957)

04 pcs silver tone head pin

12 pcs silver tone size #1 crimp beads

02 pcs spring & ball ear wire (14656)

2” chain, small cable, silver plated (340B-001)

6” Beadalon® German style wire, round, silver plated, 18 gauge (180B-018)

18” Artistic wire, 28 gauge / .32mm silver plated (AWD-28S-10-15YD)

 Tools:
Wire Cutters
Round nose pliers
Chain nose pliers

Time: Less than 1 hour

 Level Of Difficulty: Advanced

Instructions

1. Using head pin, string 6mm and form a simple loop. Repeat 1 time. Set aside.

2. Cut 3” of 18g wire and form a simple loop.

3. Cut 9” of 28g wire.

4. Coil 28g wire around 18g wire 4 times next to loop.

5. String onto 18g wire – crimp bead, 8mm, and crimp bead.

6. String onto 28g wire, 4 – 4mm, dangle from step 1, and 4mm.

7. Push beads tight on 18g wire and coil 28g wire around 6 times.

8. Repeat steps 5-7 with no dangle from step 6.

9. Repeat steps 5-7 coiling wire around 4 times (step 7). Trim end of 28g wire.

10. Push beads tight and form a simple loop on 18g wire.

11. Bend wire upward into a “U” shape.

12. Using eye pin, string 4mm, left loop of centerpiece, 8mm, right loop of centerpiece, 4mm, and form a simple loop.

13. Cut 1” of chain.

14. Attach chain to each side of loops on earring.

15. Connect ear wire to center of chain.

16. Repeat steps 1-15 for 2nd earring.