Huntington DIY Necklace

DIY JEWELRY making 


Designed by Denise Yezbak Moore
featuring Bead Gallery® beads
available exclusively at www.Halcraftcollection.com

Instructions:
Materials:
05     Bead Gallery® river shell leaf 20x43mm (12071)
08     Bead Gallery® silver plated long tube (12576)
14     Bead Gallery® silver plated rondelle (12554)
02     Bead Gallery® silver plated large tube (12157)
20     Bead Gallery® Philippine brown wood 10mm (14993)
04     Bead Gallery® Philippine brown wood 12mm (14986)
13     Bead Gallery® light tube wood (15200)
04     Bead Gallery® mother-of-pearl rectangle (12056)
20     Bead Gallery® dyed aqua agate 4mm (10102)
01     Bead Gallery® silver tone twisted ring (12117)
16     silver tone size 2 crimp beads
04     silver tone size 3 crimp beads
69”   49 strand 0.46mm beading wire
01     silver tone large lobster clasp
02     silver tone 6mm jump ring
02     silver tone 4mm jump ring

Tools:
Wire nippers
Crimping pliers
2 Chain-nose pliers

Level of difficulty (Intermediate)

Time – Less than 1 hour

Instructions:

1.     Row 1 – Cut 26” of beading wire. String 3 size 2 crimp beads, silver rondelle, size 2 crimp bead, 9 wood rondelle, size 2 crimp bead, silver rondelle and 3 size 2 crimp beads.  Set aside.
2.    Row 2 – Cut 22” of beading wire. String 3 size 2 crimp beads, (wood rondelle, silver rondelle, aqua, rectangle, aqua, silver rondelle) repeat 3 times, wood rondelle and 3 size 2 crimp beads. Set aside.
3.    Row 3 – Cut 21” of beading wire. String size 2 crimp bead, silver rondelle, size 2 crimp bead, aqua, silver tube, (aqua, silver tube, aqua, mother-of-pearl leaf) repeat 4 times, aqua, silver tube, aqua, silver tube, size 2 crimp bead, silver rondelle and size 2 crimp bead. Set aside.
4.    Connection of Necklace – Left side- Bring strands together and string 12mm wood, silver rondelle, 12mm wood, 10 wood 10mm and 2 size 3 crimp beads.
5.    ** We will be crimping all three strands together** Bring strands together, form a loop, pass wire back through crimp beads. Check loops and make sure they are the same size and crimp.
6.    Repeat step 4-5 on right side of necklace.
7.    Left side – Slide large hole tube over crimped loops. Using a 6mm jump ring, grab loops and close jump ring.
8.    Using a 4mm jump ring, connect twisted ring to 6mm jump ring.
9.    Right side – Slide large hole tube over crimped loops.  Using a 6mm jump ring, grab loops and close jump ring.
10.    Using a 4mm jump ring, connect large lobster clasp to 6mm jump ring.

Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?