Materials: (1 Package unless otherwise stated)

Icicle Ornament
01 pcs Bead Gallery® Green with stripes acrylic Christmas ornament 28mm earrings (14415A)

01 pcs Bead Gallery® crystal 6mm donut AB transparent glass (10265)

01 pcs Bead Gallery® crystal silver tone & rhinestone large hole (8mm) rondelle 9x14mm beads (14973A)

01 pcs Bead Gallery® crystal AB rhinestone rondell 4x10mm beads (12840)

01 pcs Bead Gallery® glass red transparent 14mm faceted round (10322)

02 pcs Bead Gallery® red 10mm faceted glass round (10327)

01 pcs Bead Gallery® white luster glass faceted rondell 4x6mm (10306)

01 pcs Bead Gallery® Czech glass snowflake with AB finish 11mm beads (13733A)

16 pcs Bead Gallery® glass beads faceted bicone ocean green Ab finish (11466)

23” Beadalon® German style wire, round, silver plated, 22 gauge (180B-022)

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)
Time: Less than 1 hour

 Level Of Difficulty: Intermediate

Instructions

1. Ornament - Cut 16” length of 22g wire.

2. Remove ear wire from ornament.

3. String ornament to center of wire.

 4. Bend wires to form a “v”.

5. Using round nose pliers, make a slight bend on each side of the wire at the top of ornament.

6. Bring wires together, string large rondelle, red 14mm, AB rondelle, white rondelle, red 10mm, and rhinestone rondelle.

7. Separate wires – left side – Sting 8 bicones and form a wrapped loop

8. Repeat step 7 on other wire.

9. Bend beaded wires inward.

10. Ornament Hook – Cut 7” of 22g wire.

11. Form a partial wrapped loop.

12. Connect loop to top tops from steps 7-8.

13. String red 10mm.

14. Using round nose pliers, spiral the end of wire down to 1” before the coils.

15. Using round nose pliers, make a bend in the center of the 1” wire.