BEADS & JEWELRY MAKING SUPPLIES REQUIRED

01   Bead Gallery® enameled yellow metal with rhinestone round lentil
         16mm beads (20824)
01   Bead Gallery® amber glass faceted 24x33mm rectangle (10355)
03   Bead Gallery® citrine nugget 9-15mm beads (10919)
05   Bead Gallery® Philippine white wood 12mm heishe rondell beads
        (18295)
02   Bead Gallery® super bundle - glass amber 14mm faceted disk
         beads (18970)
03   Bead Gallery® light peridot AB Czech glass fire polished
         faceted round 4mm beads (17680)
05   Bead Gallery® light green opaque Czech glass fire polished
         faceted round 6mm beads (17644)
02   Bead Gallery® jonquil AB Transparent Czech glass fire polished
         faceted round 6mm (15485)
18” German style wire, round, gold color 22 gauge
01   gold tone lobster clasp
01   gold tone 4mm jump ring
01   gold tone 8mm jump ring
10   gold tone beaded head pins
06   gold tone eye pins

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: 1 hour

Level Of Difficulty: Advanced

Easy To Follow DIY Instructions

1. Bracelet – Using eye pin, string enameled yellow beads and form a simple loop.
2. Using eye pin, string amber glass rectangle and form a simple loop. Connect to enameled loop.
3. Using eye pin, string citrine and form a simple loop. Connect to rectangle loop.
4. Using eye pin, string 3 white wood and form a simple loop. Connect to citrine loop.
5. Using eye pin, string citrine and form a simple loop. Connect to rectangle loop.
6. Cut 3” of 22g wire.
7. String white wood to center of wire and bend upward.
8. Using round nose pliers, make a slight bend at the top of wood bead. Repeat on other side of wire.
9. Wrap wire around 2 times. Trim short end.
10. Form a wrapped loop on remaining wire.
11. Repeat steps 6-10 on other side of bead.
12. Open citrine loop from step 5 and attach wood loop.
13. Using eye pin, string citrine and form a simple loop. Connect to wood loop.
14. Repeat steps 6-10 on each side of glass amber disk. Connect to citrine loop.
15. Attach 8mm jump ring to end of bracelet.
16. Using 4mm jump ring, attach lobster clasp to other end of bracelet.
17. Dangles – Repeat steps 5-10 on one side of glass amber faceted disk.
18. Using head pin, string light green opaque 6mm and form a large loop.
19. Attach loop to bottom hole of glass amber faceted disk.
20. Open 4mm jump ring and attach disk.
21. Using head pin, string light green opaque 6mm and form a simple loop. Repeat 3 times.
22. Attach light green opaque dangles to the following locations on bracelet – 4mm jump ring, between citrine and disk, and 2 on 8mm jump ring.
23. Using head pin, string jonquil 6mm and form a simple loop.
24. Attach jonquil dangles to the following locations on bracelet – between citrine and disk, and between disk and 8mm jump ring.
25. Using head pin, string light peridot 4mm and form a simple loop. Repeat 2 times.
26. Attach light peridot dangles to the following locations on bracelet – between disk and 8mm jump ring, and 2 on 8mm jump ring.

Techniques Used In This Project:
1. Wire wrapping
2. How to form a simple loop.