BEADS & JEWELRY MAKING SUPPLIES REQUIRED

01     Bead Gallery® blue Italian Murano millefiori glass drop fabricated in
           India by hand 13x21mm beads(15268A)
09     Bead Gallery® multi millefiori glass tube 8x16mm beads (15206A)
18     Bead Gallery® multi millefiori glass tube 5x8mm beads (barrel)
           (15171A)
11    Bead Gallery® dark red faceted glass rondell 6x7.5mm beads
          (16685A)
7.5” German style wire, round, silver plated, 22 gauge
05    silver tone beaded head pin ()
02    silver tone 4mm jump ring
01    silver tone 6mm jump ring
01    silver tone lobster clasp
38”  3-ply waxed linen cording

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)
G-S Hypo Cement (JA-GSHYPO)

Time: Less than 30 minutes

Level Of Difficulty: Intermediate to advanced

Tips: You can substitute cording for beading wire and crimp beads.

Easy To Follow DIY Instructions

1. Pendant - Cut 7 ½” of wire.
2. String millefiori teardrop 2” down, and bend wires upward.
3. Using round nose pliers, form a slight bend on each side of wire on the top of teardrop.
4. Wrap short wire around long wire 2 times, and trim short end.
5. String millefiori tube, and form a wrapped loop (Do not trim end of wire.)
6. Bring wire down, and form 3 coils around base of millefiori tube.
7. Trim end of wire.
8. Using head pin, string red glass, and form a simple loop. Repeat 4 times.
9. Connect dangles from step to top loop of pendant. Set aside.
10. Necklace – Using 38” of cording, find center of cord, and form a simple knot.
11. String pendant to center of cording.
12. String millefiori tube on the left side, and form a simple knot.
13. String millefiori tube on the right side, and form a simple knot.
14. Left side – String (millefiori barrel, form overhand knot, string millefiori tube, form overhand knot) repeat 2 times, (millefiori barrel, form overhand knot) repeat 8 times, (red rondelle, overhand knot) repeat 2 times.
15. Right side – Repeat step 14 on right side of necklace.
16. Connect 4mm jump ring to 6mm jump ring.
17. String 4mm jump ring on left side of necklace, and form 2 knots.
18. Trim end of cording and dab knot with glue.
19. Connect 4mm jump ring to lobster clasp.
20. String 4mm jump ring on right side of necklace, and form 2 knots.
21. Trim end of cording and dab knot with glue.

Techniques Used In This Project:
1. Wire wrapping
2. How to form a simple loop.