Falling Necklaces

DESIGNED BY DENISE YEZBAK MOORE
FEATURING BEAD GALLERY® BEADS BY HALCRAFT COLLECTION 


Materials:
Silver Tone Heart Necklace
01  Bead Gallery® silver tone heart shaped leaf pendant (17429)
01  Bead Gallery® silver-plated hamsa hand charm (12495)
35  Bead Gallery® Czech fire-polished round 8mm silver (16017)
37  Bead Gallery® Czech fire-polished round 4mm silver (15415)
53  Bead Gallery® Czech fire-polished round 5mm silver (15460)
06” silver tone 20g wire
45” brown 3-ply waxed linen cording

Rose Gold Tone Heart Necklace
01  Bead Gallery® rose gold tone heart shaped leaf pendant (17428)
01  Bead Gallery® antique copper tone fancy Aum charm (13973)
35   Bead Gallery® Czech fire-polished dark rose 8mm round (16032)
37   Bead Gallery® Czech fire-polished dusky rose 4mm round (15361)
53  Bead Gallery Czech fire-polished pink crackle 6mm round (15499)
06” copper tone 20g wire
45” brown 3-ply waxed linen cording

Gold Tone Heart Necklace
01   Bead Gallery® gold plated heart shaped leaf pendant (17426)
01  Bead Gallery® antique gold tone Aum symbol charm (14552)
35  Bead Gallery® Czech fire-polished gold 8mm round (13482)
37  Bead Gallery® Czech fire-polished honey amber 4mm (15416)
53  Bead Gallery® Czech fire-polished amber 6mm round (15520)
06” gold tone 20g wire
45” brown 3-ply waxed linen cording

Tools:
Wire nippers
Round nose pliers
2 – Chain nose pliers

Time – Less than 45 minutes per necklace

Instructions:

Silver Tone Heart Necklace
1. Pendant - Using 6” of silver tone wire, form a partial wrapped loop; connect silver leaf and complete wrapped loop.
2. String 8mm Czech silver, form a partial loop, attach to bottom of Hamsa charm and complete wrapped loop.
3. Bring excess wire down wrapping around the bead, wrap wire around bottom loop and trim excess wire
4. Necklace - Cut 45” of waxed linen cording.
5. String 4mm Czech silver to center of cording.
6. Bring cords together, pass cords through front of pendant loop, bring cords to the front, pass cords back through loop and pull tight.
7. Left side – String (4mm silver, 8mm silver) repeat 16 times, and 26 Czech 5mm silver. Set aside.
8. Right side – Repeat step 7.
9. Bring strands together, string Czech 5mm silver and form an overhand knot.
10. Separate strands, move down a tad, form an overhand knot, string 4mm silver, form an overhand knot. Trim end to desired length.
11. Repeat step 10 on other strand.

Rose Gold Tone Heart Necklace
1. Pendant - Using 6” of copper tone wire, form a partial wrapped loop; connect rose gold leaf and complete wrapped loop.
2. String 8mm Czech dark rose, form a partial loop, attach to bottom of Aum charm and complete wrapped loop.
3. Bring excess wire down wrapping around the bead, wrap wire around bottom loop and trim excess wire.
4. Necklace - Cut 45” of waxed linen cording.
5. String 4mm Czech dusky rose to center of cording.
6. Bring cords together, pass cords through front of pendant loop, bring cords to the front, pass cords back through loop and pull tight.
7. Left side – String (4mm dusky rose, 8mm dark rose) repeat 15 times, and 26 Czech 6mm pink crackle. Set aside.
8. Right side – Repeat step 7.
9. Bring strands together, string Czech 6mm pink crackle and form an overhand knot.
10. Separate strands, move down a tad, form an overhand knot, string 4mm dusky rose, form an overhand knot. Trim end to desired length.
11. Repeat step 10 on other strand.

Gold Tone Heart Necklace
1. Pendant - Using 6” of gold tone wire, form a partial wrapped loop; connect gold leaf and complete wrapped loop.
2. String 8mm Czech gold, form a partial loop, attach to bottom of Aum charm and complete wrapped loop.
3. Bring excess wire down wrapping around the bead, wrap wire around bottom loop and trim excess wire
4. Necklace - Cut 45” of waxed linen cording.
5. String 4mm honey amber silver to center of cording.
6. Bring cords together, pass cords through front of pendant loop, bring cords to the front, pass cords back through loop and pull tight.
7. Left side – String (4mm honey amber, 8mm gold) repeat 16 times, and 26 amber 5mm. Set aside.
8. Right side – Repeat step 7.
9. Bring strands together, string Czech 5mm amber and form an overhand knot.
10. Separate strands, move down a tad, form an overhand knot, string 4mm honey amber, form an overhand knot. Trim end to desired length.
11. Repeat step 10 on other strand.

Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?