undefined

Ethos Necklace

DIY JEWELRY making 


Designed by Denise Yezbak Moore
featuring Bead Gallery® beads
available exclusively at www.Halcraftcollection.com

Instructions:
Materials:
01     Bead Gallery® orange dyed agate drop 24x40mm (14914)
01     Bead Gallery® green/amber dyed agate stone rondelle (13567)
25     Bead Gallery® fancy jasper 6mm stone round (12872)
12     Bead Gallery® green aventurine rectangle nugget (13574)
02     Bead Gallery® amber line dyed agate round 10mm (13558)
34     Bead Gallery® semiprecious red jasper round 4mm (10757)
25     Bead Gallery® semiprecious red aventurine round 4mm (10725)
4”     Bead Gallery® red jasper chips (10755)
82”   brown 3-ply waxed linen cording
7”     gold tone 28g wire

Tools:
Wire nippers
Super glue

Level of difficulty (Advanced)

Time – 1 hour

Instructions:

1.    Using 7” of gold wire, string agate drop pendant and form a wrapped loop.
2.    Gently squeeze loop so it will fit through bead.
3.    Cut 1 length of 60” cording.
4.    String cord to the center of loop from step 2.
5.    Bring strands together and string agate stone rondelle slipping over wrapped wire loop.
6.    Bring strands together and form an overhand knot.
7.    Separate strands – Left side – Form a simple knot and string beads in the following order:  jasper, knot, jasper, knot, green aventurine, knot, line agate, knot, aventurine, knot, jasper, knot, jasper, knot, 3 red jasper, knot, jasper, knot, jasper, knot, 3 red aventurine, knot, green aventurine, knot, 3 red aventurine, knot, jasper, knot, jasper, knot, 6 red jasper chips, knot, jasper, knot, jasper, knot, green aventurine, red jasper, green aventurine, knot, 3 red aventurine, knot *red jasper, knot* repeat 8 times, green aventurine, knot, 3 red aventurine, knot, jasper, knot, 3 red jasper and knot.
8.    Repeat step 7 on the right side of necklace.
9.    Bring strands together and form an overhand knot.
10.    Separate strands – form knot, string red jasper chip and form knot. Trim end and fray.
11.    Repeat step 10 on other strand.
12.    Pendant – Cut 11” of cording.  String 15 red jasper chips (fit around bottom of green/amber agate rondelle – adjust beads as needed).
13.    Wrap around bottom of green/amber agate rondelle and form a simple knot.
14.    Bring cords around to the front and form a simple knot.
15.    Separate strands, move down ¼ inch, form knot, string red aventurine round, form knot, move down ¼” inch, string jasper, chip and form a simple knot. Trim end of cord and fray.
16.    Repeat step 15 on other strand replacing bead with red jasper and jasper.
17.    Cut 11” of cording. Wrap cording around bottom of chips and form 2 simple knots.
18.    Trim 1 end of cording.
19.    Repeat step 15 replacing beads with jasper and red jasper.

Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?