BEADS & JEWELRY MAKING SUPPLIES REQUIRED

01 Bead Gallery® red cubic zirconia faceted pointy oval 14x28mm
pendant (14773A)
19 Bead Gallery® light red AB Czech glass fire polished faceted round
4mm beads (17666)
16 Bead Gallery® silver tone head pins (12959)
62 Bead Gallery® silver tone jump ring 4mm (12960)
01 Bead Gallery® small lobster clasp
03 Bead Gallery® silver tone eye pins (12958)
3.5” Beadalon® German style wire, round, silver plated 18g (180B-018)
37” small link silver tone chain

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: 1 hour

Level Of Difficulty: Advanced 

Easy To Follow DIY Instructions

1. Prep Work - Cut 12 lengths of 2” chain. Set aside.
2. Cut 2 lengths of 6 ½” chain. Set aside.
3. Using head pin string Czech 4mm. Move up 3/8” from the Czech bead and form a simple loop. Repeat 15 times. Set aside.
4. Remove top of bail from pendant and connect a 4mm jump ring to loop.
5. Prep 60 jump ring by making sure the ring is closed.
6. Centerpiece – Cut 3 ½” of wire and form a simple loop.
7. String dangle, 4 jump rings (repeat 6 times), dangle, 2 jump rings, 6 lengths of 2” chain, pendant, 6 lengths of 2” chain, 2 jump ring, (dangle, 4 jump rings) repeat 6 times, dangle, and form a simple loop.
8. Necklace Connection – Using eye pin, string Czech 4mm and form a simple loop. Repeat 2 times.
9. Using loops from step 8, connect chain from step 2 to each side of centerpiece.
10. Using a 4mm jump ring, connect lobster clasp to right side of necklace.
11. Connect loop from step 8 to end of left side of necklace.