Materials: (1 Package unless otherwise stated)

16 pcs Bead Gallery® gold tone metal cut rectangle 2x2.5mm beads (21281A) (spacer)

30 pcs Bead Gallery® gold tone metal cut bicone 3.5x5mm beads (21273A)

01 pcs Bead Gallery® gold tone with rhinestones round North Star 20mm charm (14573A)

01 pcs Bead Gallery® blue dyed druzy agate stone with gold 20-25x33-38mm connector (17740A)

06 pcs Bead Gallery® glass beads faceted round (32 facets) dark sapphire luster (11988)

01 pcs gold tone 6mm jump ring

 01 pcs gold tone 4mm jump ring

01 pcs gold tone lobster clasp

54” Bead Gallery® dark purple nylon monochord thin beading thread .12mm (12346)

01 pc Beadalon® collapsible eye needle fine (700F-102)

 Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014) B
eadalon 2 slim line chain nose pliers (201A-011)
G-S Hypo cement

Instructions

1. Attach 4mm jump ring to top of stalactite connector.

2. Attach star charm to bottom of connector. Set aside.

3. Cut 54” of purple thread.

4. String collapsible needle to center of the thread. Fold thread in half.

5. String connector to end of thread leaving a 5” tail (opposite side of needle) and form and over knot 2 times.

6. Dab knot with glue and let dry.

 7. Short ends – Cut cording in the center.

8. Short Strand 1 – form an overhand knot. String 2 spacer beads and form an overhand knot. Trim end and fray.

9. Repeat step 8 on other short strand.

10. Bracelet – Long strands with needle – String spacer bead, faceted glass and form an overhand knot. Repeat 5 times.

11. Separate strands 1 spacer, 15 bicones on each strand.

12. String jump ring and form 2 knots. Dab knot with glue.

13. Left Over Strands – Separate strands – String 2 spacer beads on each strand. Bring strands together and form an overhand knot. Trim end and fray.

14. Attach charm to end loop of connector.