Cherish necklace

DESIGNED BY Denise Yezbak Moore
FEATURING BEAD GALLERY® BEADS BY HALCRAFT COLLECTION 

Learn how to make this Cherish Necklace by designer Dense Yezbak Moore featuring Bead Gallery beads by Halcraft Collection. The instructions for this beautiful Bead Gallery creation include a comprehensive list of DIY jewelry making materials and supplies from our huge inventory of beads, charms, connectors, pendants, findings, stringing materials and tools. As well as a step by step DIY jewelry making a how-to guide for creating this one of a kind statement piece. Creating beautiful jewelry is easy with Halcraft Collection.

Share your masterpiece with us on Instagram or Facebook. Simply hashtag @halcraftcollectionbeads.

BEADS & JEWELRY MAKING SUPPLIES REQUIRED

09   Bead Gallery® Preciosa bicone 6mm violet AB (16238)
05   Bead Gallery® Preciosa bicone 6mm turquoise AB (16220)
15   Bead Gallery® Preciosa bicone 4mm turquoise (16174)
26   Bead Gallery® Preciosa bicone 3mm blue zircon AB (16109)
30   Bead Gallery® Preciosa bicone 3mm orange sun (16103)
16   Bead Gallery® Preciosa bicone 4mm rose AB (16142)
10   Bead Gallery® Preciosa bicone 6mm peridot (16225)
09” Beadalon® German style wire, round, antique brass 22g (180R-022)
02   antique brass 8mm jump ring
19   antique brass eye pins
24” antique brass medium link chain

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon slim line round nose pliers (201A-014)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: 1 hour

Level Of Difficulty: Advanced

Easy To Follow DIY Instructions

1. Loop 1 – Using brass eye pin, string orange, rose, peridot 6mm, orange and form a simple loop.
2. Repeat step 1 – 5 times.
3. Loop 2 – Using brass eye pin, string blue zircon, violet, turquoise, blue zircon and form a simple loop.
4. Repeat step 3 – 4 times.
5. Connect loops 1 and 2 to 8mm jump ring in the following order – (loop 1, loop 2) repeat 4 times, and loop 1.
6. Cut 9” of 22g wire.
7. Form a simple loop at 1 end of wire. Make sure your loop is facing the side.
8. Very important… Make sure you start stringing wire were the 2 peridot loops (loop 1) are next to each other.
9. In step 10 you will move beads over forming a half circle.
10. String blue zircon, loop 1, blue zircon, rose, turquoise 4mm, orange, loop 2, orange, and turquoise 4mm (repeat 4 times). Continue stringing rose, blue zircon, loop 1, blue zircon, and form a simple loop.
11. Necklace Connection - Using eye pin, string orange, left side of pendant, orange, turquoise 6mm, orange, right side of pendant, orange and form a simple loop.
12. Slightly bend wire up ward from step 11.
13. Cut 24” of chain (or desired length) and attach to each side of loop from step 11.
14. Fringe – Using eye pin, string orange, turquoise, and form a simple loop.
15. Using eye pin, string blue zircon, peridot 6mm, and form a simple loop. Attach loop to loop from step 14.
16. We are going to create are own head pins. Cut 1 1/2'” of 22g wire.
17. Using your slim nose pliers, place a small bit of wire into pliers and squeeze hard. Repeat 1 time. End of wire should be flat.
18. String violet, rose, and form a simple loop. Attach loop to loop from step 15.
19. Repeat steps 18 a total of 4 times.
20. Open loops and attach to center bottom of pendant.

Click Here For PDF Instructions

Denise Yezbak Moore is a self-taught artisan who loves to create anything with a bohemian flair. She specializes in one-of-a-kind jewelry designs, photography, and social media. Denise resides in Orange County, CA with her husband and two children.