BOHEME DIY Bracelet

DESIGNED BY DENISE YEZBAK MOORE
FEATURING BEAD GALLERY® BEADS BY HALCRAFT COLLECTION 


Materials:
.01     Bead Gallery® 24mm triangle faceted aqua dyed agate (14927)
02     Bead Gallery® silver plated Bali-style snake tube (16472)
01     Bead Gallery® green dyed agate nugget slice (15153)
01     Bead Gallery® green agate nugget (14922)
01     Bead Gallery® silver plated Bali-style 3 hole rondelle (16473)
02     Bead Gallery® green aqua AB quartz sticks (14958)
04     Bead Gallery® dyed imperial jasper green round 8mm (10605)
01     Bead Gallery® silver plated rope style toggle clasp (16539)
01     silver tone 5mm jump rings
10”   silver tone 24g wire
120” brown 3-ply waxed linen cording

Tools:
Wire nippers
2 Chain nose pliers
Round nose pliers
Super glue
Clipboard
Document clip

Level of difficulty (Advanced)

Time – 1 hour

Instructions:

1.    Cut 3 lengths 30” of cording.
2.    Bring cords together; move down 7” and place cords under clipboard clip.
3.    Separate strands and clip center strand to bottom of clipboard with document clip.
4.    For 14 square knots (or 28 half knots) – Be sure to measure your agate slice and adjust knots as needed.
5.    Remove macramé from clipboard.
6.    Bring 3 strands together, string agate slice and round toggle.
7.    Bring all strands together placing macramé on the front of agate and form an overhand knot.
8.    Move down 1” and cut cording. Fray ends.
9.    Cut 30” of cording.
10.    String cording underneath macramé and slide to opposite side of fringe.
11.    Center cording, bring strand together and string triangle agate, form knot, separate strands, string left/right holes of 3 hole Bali-style, bring strands together, form knot, bring strands together, string agate rondelle nugget, form knot, separate strands, string tubes on each strand, bring strands together, form knot, trim 1 strand of cording and dab knot. Let dry.
12.    String imperial jasper, form knot (repeat 3 times).
13.    Attach 5mm jump ring to toggle bar.
14.    String Toggle bar, form 2 knots.
15.    Trim cording and dab knot with super glue.
16.    Cut 10” of 26g wire.
17.    String 2 green quartz sticks; wrap wire around sticks 5 times.
18.    Wrap short end of wire at base of long wire. Trim short wire end.
19.    Form a partial wrapped loop.
20.    Connect loop to round toggle and complete wrapped loop.

Denise Yezbak Moore is a self-taught artisan. Denise has been a senior designer here at Halcraft Collection for 9 years. She loves to create jewelry with a bohemian flair. She resides in Southern California and enjoys hearing from fellow beaders.



WHAT WILL YOU CREATE?