BEADS & JEWELRY MAKING SUPPLIES REQUIRED

16       Bead Gallery® Bodhi Nut Rondell 10x18mm (18906)
14       Bead Gallery® Bodhi nut cube 8-10mm beads (18907)
16       Bead Gallery® Bodhi nut round 9-10mm beads(18909)
11       Bead Gallery® carved Bodhi nut round 12mm beads(18903)
06       Bead Gallery® Bodhi nut bicone 8x10mm beads (18908)
09       Bead Gallery® carved Bodhi nut round 14mm beads(18902)
06       Bead Gallery® brown tube etched wood 9x22m beads (16706)
06       Bead Gallery® brown oval etched wood 10x15mm beads (16701)
08       Bead Gallery® wood tube 12mm (18905)
01       Bead Gallery® painted wood carved floral pendant (90856)
01       Bead Gallery® lobster claw clasp 14mm silver tone plated (14648)
01       Bead Gallery® silver tone jump rings 1x10mm (12967)
74”     black 4-ply waxed linen cording
144”  black 2-ply waxed linen cording

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: 1 to 1 ½ hours depending on skill level

Level Of Difficulty: Advanced

Easy To Follow DIY Instructions

1. Row 1 - Cut 2 lengths 72” of 2 ply cording.
2. Bring strands together, and form an overhand knot in the center of strands.
3. Left side – Separate strands, string wood rondelle to center knot, pass 2nd strand through hole on other side of bead.
4. Center bead, and form an overhand knot.
5. Separate strands, string wood rondelle to previous knot, pass 2nd strand through hole on other side of bead.
6. Center bead and form an overhand knot.
7. Repeat steps 5-6 – 6 times.
8. Separate strands, string cube, bring strands together, and form an overhand knot. Repeat 6 times.
9. Repeat steps 3-8 on right side of necklace.
10. Pendant – Cut 24” of 4-ply cording.
11. Remove bale from pendant.
12. String pendant to center of cording and form 2 overhand knots on top of each other.
13. Find center of necklace, and tie pendant to center using 2 simple knots.
14. Separate strands, move down a tad, form an overhand knot, string nut bicone, and form an overhand knot. Trim end to desired length.
15. Repeat step 14 on other strand. Set necklace aside.
16. Row 2 – Cut 25” of 4-ply cording.
17. String wood tube, black seed, etch wood tube, 6mm glass, (etched oval, 6mm glass) repeat 2 times, etched tube, nut round, nut fancy 12mm, (nut round, 3 nut fancies) repeat 2 times, nut round, nut fancy 12mm, nut round, etched tube, (6mm glass, etched oval) repeat 2 times, 6mm glass, etched tube, black seed, and wood tube.
18. Form an overhand knot on each end of necklace. Set aside.
19. Row 3 – Cut 25” of 4-ply cording.
20. String nut bicone, 3 wood tube, nut bicone, black seed, etched tube, black seed, 5 nut rounds, nut bicone, 9 fancy 14mm, nut bicone, 5 nut rounds, black seed, etched tube, black seed, nut bicone, 3 wood tubes, and nut bicone.
21. Form an overhand knot on each end of necklace.
22. Connection Of Necklace – Left side – Bring strands together and form an overhand knot.
23. Move down ¾”, string 12mm jump ring, and form 2 simple knots.
24. Trim end to desired length and fray ends.
25. Right Side – Bring strands together and form an overhand knot.
26. Move down ¾”, string lobster clasp, and form 2 simple knots.
27. Trim end to desired length and fray ends.