BEADS & JEWELRY MAKING SUPPLIES REQUIRED

01 Bead Gallery® white acrylic pearl and rhinestone metal connector
(13156)
01 Bead Gallery® turquoise dyed agate drop with silver pendant
(18013)
01 Bead Gallery® citrine cubic zirconia faceted 14x28mm pointy oval
pendant (15106)
10 Bead Gallery® crystal AB rhinestone rondell 4x10mm beads
(12840)
62 Bead Gallery® turquoise glass Czech faceted round 5.5mm beads
(16684A)
80 Bead Gallery® turquoise dyed reconstituted stone rondell beads
3x5mm (12366)
44” brown 7-ply waxed linen cording
01 Bead Gallery® silver tone 4mm jump ring (12960)
01 Bead Gallery® silver tone 6mm jump ring (12961)

Tools:
Beadalon classic nipper tool (JTNIP1)
Beadalon 2 slim line chain nose pliers (201A-011)

Time: Less than 60 minutes

Level Of Difficulty: Intermediate to Advanced 

Easy To Follow DIY Instructions

1. Pendant - Remove bail from agate pendant.
2. Remove top bail (leaving the bottom portion) from citrine pendant.
3. Using 4mm jump ring, connect agate pendant and citrine pendant to pearl connector.
4. Connect 6mm jump ring to top of pearl connector.
5. Necklace - Cut 44” of cording.
6. Find center of cording and form an overhand knot.
7. String Czech, rhinestone rondelle, Czech, pendant, Czech, rhinestone rondelle, Czech and form an overhand knot.
8. Left side of Necklace – String 5 turquoise rondelles, form an overhand knot, 2 Czech glass, rhinestone rondelle, 2 Czech glass and form an overhand knot. Repeat 3 times.
9. String 5 turquoise rondelle, form an overhand knot, 4 Czech glass, and form an overhand knot. Repeat 2 times.
10. String 5 turquoise rondelle, and form an overhand knot.
11. Right side of Necklace – Repeat steps 8-10 on the right side of necklace.
12. Bring strands together and form an overhand knot.
13. Separate strands – Left side – Move down a tad, form an overhand knot, string Czech glass, form an overhand knot, trim end and fray.
14. Repeat step 13 on right side strand.