Aqua Autumn DIY necklace

DESIGNED BY Denise Yezbak Moore
FEATURING BEAD GALLERY® BEADS BY HALCRAFT COLLECTION 

Materials:
10      Bead Gallery® aqua dyed dolomite round 10mm (13225)
05      Bead Gallery® dyed imperial jasper square 15x15mm (13202)
04      Bead Gallery® natural boulder agate oval (13580)
06      Bead Gallery® natural apatite stone 6mm round (13209)
03      Bead Gallery® natural apatite stone 10mm round (13213)
01      Bead Gallery® small cream tassel (14662)
01      Bead Gallery® antique copper lotus Aum charm (13969)
04      Bead Gallery® multi dyed agate lentil 16mm (blue) (16686)
01      Bead Gallery® howlite dyed turquoise rondelle 2x4mm (17066)
148” antique brass tone 22g wire
01      8mm brass tone jump ring

Tools:
Wire nippers
Round nose pliers
2 – Chain nose pliers

Time: 1 hour

Instructions:
1. Cut 2 ½” of brass wire.
2. Form a wrapped loop.
3. String apatite 6mm and form a wrapped loop.
4. Repeat 5 times, chaining loops together as you go.
5. Cut 2 ½” of brass wire.
6. Form a partial wrapped loop; connect to previous loop, and complete wrapped loop.
7. String dolomite and form a wrapped loop.
8. Repeat 4 times, chaining loops together as you go.
9. Cut 2 ½” of brass wire.
10. Form a partial wrapped loop; connect to previous loop and complete wrapped loop.
11. String Apatite 10mm and form a wrapped loop.
12. Cut 2 ½” of brass wire.
13. Form a partial wrapped loop; connect to previous loop and complete wrapped loop.
14. String blue lentil and form a wrapped loop.
15. Repeat 1 time, chaining loops together as you go.
16. Cut 10” of brass wire.
17. Form a partial loop, attach to previous loop in chain, and complete wrapped loop.
18. String square imperial jasper, and form a wrapped loop.
19. Bring wire down left side, wrap around bottom loop, bring wire up on right side and wrap around top loop.
20. Repeat step 19 on backside of imperial jasper.
21. Repeat steps 16-20 one time.
22. Cut 10” of brass wire.
23. Form a partial loop, attach to previous loop in chain, and complete wrapped loop.
24. String boulder oval, and form a wrapped loop.
25. Bring wire down left side, wrap around bottom loop, bring wire up on right side and wrap around top loop.
26. Repeat step 25 on backside of imperial jasper.
27. Repeat steps 22-26 three times.
28. Repeat steps 16-21.
29. Repeat steps 12-15.
30. Repeat steps 9-11.
31. Repeat steps 5-8.
32. Repeat steps 1-4 (on the last ending loop, form partial loop, connect to other side of chain and complete wrapped loop.)
33. Attach lotus flower charm in between apatite 6mm (3 on each side of charm.)
34. Center Dangle - Cut 10” of brass wire.
35. Form a partial loop, attach to previous loop in chain, and complete wrapped loop.
36. String square imperial jasper, and form a wrapped loop.
37. Bring wire down left side, wrap around bottom loop, bring wire up on right side and wrap around top loop.
38. Repeat step 37 on backside of imperial jasper. 3
9. Cut 2 ½” of brass wire.
40. Form a partial loop, attach to previous loop in chain, and complete wrapped loop.
41. String howlite faceted, apatite 10mm, and form a partial wrapped loop.
42. Attach tassel and complete wrapped loop.
43. Using 8mm jump ring, attach dangle to center of the necklace. 

Denise Yezbak Moore is a self-taught artisan who loves to create anything with a bohemian flair. She specializes in one-of-a-kind jewelry designs, photography, and social media. Denise resides in Orange County, CA with her husband and two children.